UMP and IM are not able to login to the hub

Document ID:  TEC1809844
Last Modified Date:  06/12/2017
{{active ? 'Hide' : 'Show'}} Technical Document Details

Products

  • CA Unified Infrastructure Management

Releases

  • CA Unified Infrastructure Management:Release:8.47
  • CA Unified Infrastructure Management:Release:8.51
  • CA Unified Infrastructure Management:Release:8.5

Components

  • UIM - HUB:UIMHUB
  • UIM - ROBOT:UIMROB
Introduction:

When there is a robot installed on the server pointing to a drive C:\program files (x86)\Nimsoft and afterwards there is another robot and hub installed on the same server pointing to drive F:\nimsoft, the Nimsoft Robot Watcher Service will point to "C:\Program Files (x86)\Nimsoft\bin\nimbus.exe" instead to the new Path F:\Nimsoft. This will cause that the hub.exe process is never started by the controller out of the "C:\Program Files (x86)\Nimsoft\" location. You may also see a missmatch in installed versions.

Question:

Why can we not login to the hub with IM and UMP after the  installation of a robot and a hub.

Environment:
UIM 8.x hub 7.x robot 7.x
Answer:

 

The solution is to uninstall the robot from the C:\program files (x86)\Nimsoft verify the Nimsoft Robot Watcher Service has been removed from the Service Control panel.

Reinstall the robot and hub into the folder F:\Nimsoft  and verify you are now able to login to the hub with IM and UMP.

Please help us improve!

Will this information enable you to resolve your issue?

Please tell us what we can do better.

{{feedbackText.length ? feedbackText.length : '0'}}/255

{{status}}

Not what you were looking for?

Search Again >

Product Information

Support by Product >

Communities

Join a Community >